Hydraulic Steel Briquetting Compress

This SBJ-2000 scrap metal briquette press is mainly applied in the aluminum alloy section plant, steel casting foundry, aluminum casting factory, copper casting plant, etc. It compresses the waste metal into briquette for melting again instead of the scrap steel, pig iron, aluminum ingot and...

Send Inquiry

Chat Now

Operating procedures of metal chip briquetting machine

With the development of technology, the metal shavings cake press is continuously upgraded. At present, it can squeeze various metal scraps, steel shavings, scrap steel, scrap iron, scrap copper, scrap iron, iron shavings, and metal raw materials into a circle. Pie-shaped. After such treatment, it is convenient for storage, transportation and recycling of various metal scraps. If the iron chip cake press strictly follows the operating procedures, a lot of unnecessary troubles can be avoided.

1. Check whether the oil level of the oil tank level gauge is in the normal position. If it is not displayed, add oil until the level gauge can see the oil level. Ensure that the fuel tank is filled with 60%-80% oil before starting the motor.

2. Press the "Start" button, the running indicator light is on, and listen to whether the sound of the oil pump is abnormal. If there is any abnormality, it should be shut down immediately for inspection.

3. Turn the manual switch to manual, and operate the main cylinder, the plate-drawing cylinder, and the feeding cylinder two or more times without feeding the empty machine, and observe whether it can work normally and whether the pressure gauge reaches the set value normally. Whether there is oil leakage at the road and joints.

3_01