This is a scrap car baler project customized by us for American customers.
The scrap car baler can pack a whole set of scrap cars at a time. Press it into a compact block for easy recycling and transportation. The material box of this machine is 5 meters long and can handle most cars, vans and off-road vehicles. And we use the latest fast pressing technology, it only takes 240 seconds to press a car.
With this scrap car baler project, one worker can handle the recycling work of an entire waste station. One machine can replace the work of shears, crushers, and presses, which greatly saves manpower and capital costs. At the same time improve production efficiency
This is the detailed parameter table:
YD-4000C Auto baler Specification
|
Sr.no |
Type name |
unit |
Model or data |
||||
|
Cover cylinder |
Side cylinder |
Main cylinder |
Door-lock cylinder |
Bale out cylinder |
|||
|
1 |
Nominal pressure |
KN |
2600 |
4000 |
4000 |
260 |
400 |
|
2 |
Inner diameter of cylinder |
mm |
Φ250×2 |
Φ320×2 |
Φ450 |
Φ125×2 |
135 |
|
3 |
Piston diamter |
mm |
Φ180 |
Φ200 |
Φ220 |
Φ70 |
Φ95 |
|
4 |
stroke |
mm |
2550 |
4300 |
2400 |
100 |
900 |
|
5 |
Max.pressure |
Mpa |
25 |
25 |
25 |
15 |
25 |
|
6 |
Bale density |
About 2.0 t/m3 |
|||||
|
7 |
Electrical motor |
2sets |
45KW |
||||
|
8 |
Oil pump |
2sets |
250YCY14-1B |
||||
|
9 |
Single cycle time |
s |
About 200S |
||||
|
10 |
Material box size |
mm |
5000×2000×1200 |
||||
|
11 |
Bale size |
mm |
800×800×800～1400 |
||||
|
12 |
Bale weight |
Kgs |
700-1000 |
||||
|
13 |
Hydraulic system cooling way |
Auto air cooler, auto temperature control |
|||||
|
14 |
Bale out mode |
Side Bale |
|||||
|
15 |
Control mode |
PLC control,automatical cycle,remote control |
|||||
|
16 |
Capacity |
T/H |
12-15T/H |
||||
|
Memo:This machine's main cylinder,side cylinder, door cover cylinder all have differential action fast speed device,capacity is double of normal baler in market and save engery up to 50%. |
|||||||
