cheap Integrated Horizontal Metal Baler Basic structure of vertical hydraulic baler The vertical hydraulic baler is mainly composed of hydraulic cylinder, motor and oil tank, pressure plate, box body and base, upper door, lower door, door latch, packing belt bracket, iron support, etc. The machine is running too slowly Something is plugging the suction filter, vent cap, or pressure filter, or the hose is pinched; the motor voltage is low; the hydraulic oil is thin or thick Motor overheated Incorrect wiring; pump overheating due to lack of oil; hydraulic oil too thin or too thick; cheap Integrated Horizontal Metal Baler Oil leaks or oil is sprayed out of the oil tank, the blockage of the vent hole causes the pressure of the oil tank to increase, and the oil is sprayed out. Clean the vent hole or replace it with a vent. The machine can't work, the motor can't run Control fuse blown; motor starter overload disconnected. Press the "reset" button on the controller; the lead fuse is blown; check the transformer; check the button.

Product Description