Automatic Hydraulic Briquetting Press

Automatic Hydraulic Briquetting Press Video：

It's time to turn copper waste into an asset. Save Your Money From Briquetting

Product instruction

The aluminum chip cake press is a metal chip compression and volume reduction equipment designed to process loose aluminum chips, copper chips, and iron chips in the factory. During the compression process, it can also collect waste liquid in the chips to prevent the turbulent flow of metal chips to the environment. pollution caused. In order to ensure the smooth operation of the equipment, reduce failures and reduce operating costs

Product show

Why you need our machine

1. Whether it's turnings, chips, filings, shavings or sludge, the steel you use is being wasted as it gathers on your shop floor

2. Automatic Hydraulic Briquetting Press, in the form of turnings, filings, chips and shavings, piling up on the equipment and floor. taking up the valuable floor space

3. What do you do with your copper scrap,If you are like many manufacturers, the scrap is stored in your yard, then hauled away (at your expense) to be disposed of

This is a complete and automatic briquetting production line for making briquettes, The applicable raw materials are commonly for scrap copper, aluminum powder, cast iron, steel scraps, metal scraps, powder grainy and etc. All machines of this briquetting production line are our new type with high efficiency. Compared with old type, the new type machines are upgraded in many aspects, including the electric motor, moulds, hydraulic pressure system, electric control system, etc.

Aluminum chip cake press operating procedures

1. Before starting the equipment, check whether the hydraulic oil level is within the normal range. If the hydraulic oil position is not displayed, you need to add oil until the level gauge can see the oil level. Ensure that the equipment tank accounts for 60% to 80% of the tank volume. %, and then restart the device.

2. When starting the equipment, after pressing the "Start" button, and after the running indicator light comes on, pay attention to whether there is any abnormality in the sound of the oil pump. If any abnormality occurs, stop the machine in time for inspection.

3. Adjust the manual transfer switch to manual mode, do not add materials first, operate the equipment with an empty machine, and observe whether it can work normally, whether the pressure gauge is adjusted normally, and whether there is oil leakage at the interfaces of each hydraulic component.

Hot Tags: automatic hydraulic briquetting press, factory, customized, cheap, low price, Scrap Copper Chip Briquetting Machine, Plc Full automatic Metal Chips Briquetting Press, Iron Filings Briquetting Press Machine, Multi function Metal Briquetting Press Machine, Automatic Feeding Copper Recycling Machine, Tire Wire Briquetting Compactor Machine